CloudCompare forum

I have tried to save the result by selecting the cloud icon of **stl** files in cloudcomapre and save the compared results by this kind: https://i.stack.imgur.com/l2o61.png So i have in some **.asc** file by 4 columns as you can see here: https://i.stack.imgur.com/ZzqRA.png And some others i have 6 ...

I have tried cloudcompare and the aligning c2m module like this: https://i.stack.imgur.com/LHqWq.png and give transformation matrix lie this: https://i.stack.imgur.com/T8aDI.png [![enter image description here][4]][4] For one **STL** file twice and get different result for under 0.1 value in max dis...

I have two dental stl file which have seems have set the correct units when i opened them in freecad: https://i.stack.imgur.com/ERrFP.png The units have set but based of this post it must not be set to specific unit : > STL files are unit-less, so they don't contain the actual units. Most > people u...

I have saved the data from histogram by c2m by this kind : [![enter image description here][1]][1] [![enter image description here][2]][2] So it excel it shown as this type: [![s][3]][3] Also seen this question, so i know the class is the class color number (0-255 for rgb), and i guess **class value...

I have one mistake in my cutting process which i have cut also some tiny part of the final cut by dimension by segment tool which made that difference in the results, so by repeating the above process i get the same results for both of those cut by the same target and two same reference stl file wit...

according to these two previous question: Cloud compare Cut at specific coordination by one reference cut and : Cloud-compare Cut at specific coordination by one reference cut (second part of question) I have test compare one target stl file with two the same reference file which one of the has alig...

according to this question: https://www.cloudcompare.org/forum/viewtopic.php?f=9&t=4521&p=20600#p20600 **I have almost 4 model which most be compared with with reference for every calculation , also need to do compare calculation only for some part of model so needs to cut the stl model and ...

I have two dental stl file which have seems have set the correct units when i opened them in freecad: https://i.stack.imgur.com/ERrFP.png The units have set but based of this post it must not be set to specific unit : > STL files are unit-less, so they don't contain the actual units. Most > people u...

i have almost 4 model which most be compared with with reference for every calculation , also need to do compare calculation only for some part of model so needs to cut the stl model and if i can do it only once on the reference model it could be fine for me, but i have done it and dont cut the targ...

I have two mode which using the cloud compare for comparing those together, i used the ordinary distance compare method ( C2M signed method) with this parameter as you can see here: https://i.stack.imgur.com/7TFaN.png and for more details i tried also the M3C2 method by this parameters: https://i.st...